How removed Tecno T484, and T465 without miracle errors / reset password
 |
Removing or flashing Tecno T484 and T465 using MTK flash tools involves the following steps:
1. Download and install the MTK flash tool on your computer. Link 🔗 https://link-target.net/547131/the-mediatek-flash-tool
2. Download the firmware file for your specific Tecno T484 or T465 model.
3. Launch the MTK flash tool and select the scatter-loading file for your Tecno device.
4. Connect your Tecno T484 or T465 device to your computer using a USB cable.
5. Click on the "Download" or "Firmware Upgrade" button in the MTK flash tool.
6. Wait for the flashing process to complete. This may take a few minutes.
7. Once the flashing process is complete, disconnect your Tecno device from the computer and restart it.
Note: Make sure to back up all important data on your Tecno device before flashing it, as the process will erase all data on the device. Also, ensure that your device's battery is fully charged or at least 50% charged before starting the flashing process.
Please support the community with any amount
Bonus for you...http://tinyurl.com/Dlinkss5
